All-purpose glue containing no animal ingredients and produced
without animal testing. Glues often contain casein, a milk
protein.
8 fluid ounce bottle.
*Non-flammable, non-toxic & dries clear
*Unmatched as a primer for porous surfaces
*Highly water-resistant & impervious to petroleum, oil,
grease, salt, moulds and fungi, alkali's & weak acids.
*Withstands all climatic conditions after curing
*Non-staining and will not become brittle with age
*Highly concentrated, can be mixed with water and used a a sealer
for many surfaces.
Adheres Tiles, Felt, Rugs, Bricks, Laminate Flooring, Carpets,
Slate, Linoleum, Foam, Plastic, China, Cardboard, Paper,
Upholstery, Fabrics, Plasterboard, Wallboard, Furniture, Glass,
Plywood, and Wood
Weldbond as a glue:
Use Weldbond at full strength without diluting. Apply to one
surface and press together. Allow to dry thoroughly.
Weldbond when bonding two porous surfaces:
When bonding two porous surfaces, surface sealing can be done
prior to adhering for optimal results. Determine if the surfaces
are porous by placing a drop of water on the surface. If the
water lies on the surface, then sealing is unnecessary. If water
soaks in, then you may want to prep the surface by sealing them
with Weldbond. Porous surfaces can be primed by mixing one part
Weldbond and five parts water, then apply liberally and allow to
fully dry. Then spread a thin film of Weldbond on both surfaces.
Clamp lightly and let dry.
Weldbond when bonding porous to non-porous materials:
Spread a thin film of Weldbond on both surfaces; place the
surfaces together. The longer that it is let to cure, the
stronger the bond will be. Weldbond cures by evaporation, and
when it is fully cured the bond appears crystal clear.
Weldbond as a sealer:
Mix one part Weldbond with five parts water. This makes a porous
surface sealer and primer. Concrete, plasterboard, or any surface
that is porous can then be bonded or painted. This can save you a
coat of primer.
Weldbond as a general adhesive mix:
For bonding any rough and uneven surface, mix one part Weldbond,
with one part water and 4 to 5 parts filler (plaster, tile grout,
mortar mix, sand-cement mix).
Please note:
Weldbond dries chemically in air. You can reduce curing time by
allowing it to dry slightly before making the bond. This can
reduce the curing time, but might also compromise a bit of
Weldbond's strength. We suggest one to three days of curing time
for maximum strength.
vegangoods.com offers hundreds of vegan products at 5-40% below retail including vegan cosmetics, vitamins, food and sweets, cleaning supplies, and candles.